An approach to simulate wind fields around an urban environment for wind energy application

This work proposes an approach to simulate wind flow fields around an urban environment with the aim of evaluating the potential impact of buildings on the general wind patterns and power production using the current generation of commercial wind turbines. The simulation process was performed with the aid of accessible computational tools that can potentially render the proposed procedure applicable in other cases of interest. The roughness of the urban environment was defined as the association of roughness map, topography, and an alternative process for obtaining the volumetry of buildings. A case study was conducted in a region located at the district of Boa Viagem (Recife-PE) for assessing the applicability of the approach. Scenarios were designed in order to simulate wind flow patterns and pre-identify sites that have suitable wind energy potential for electric power production by investigating the combination of wind speed magnitude and turbulence intensity. From the results obtained, it was possible to identify zones of potential wind sources that are not detected in classical wind atlas probably due to the influence of the built environment on local wind flow patterns.     

Heterogeneous alternative catalysts: A bibliometric and systematic evaluation of their application in solar photocatalytic processes

The present study sought to objectively demonstrate how a researcher can, in a structured way, select relevant articles about alternative heterogeneous catalysts in photocatalytic processes. Therefore, the ProKnow-C (Knowledge Development Process – Constructivist) method was used to systematize the results found, with the application bibliometric and systematic analysis techniques for the evaluation of the results. The search string adopted as criteria was: solar photocatalysis AND heterogeneous catalysts OR alternative catalysts AND effluents. The databases were Web of Science, Science Direct and Scopus. The final bibliographic portfolio obtained for the research theme was made up of 19 articles. It was possible to verify advances in the number of publications on the theme over the evaluated period, with the Journal of Photochemistry and Photobiology A: Chemistry standing out in the final portfolio. Evaluating each article in the portfolio individually, it was possible to verify that most studies use combinations of catalysts already reported to create an alternative material to those already investigated in the literature. Those that use waste as catalysts chose to source this material from treatment plants and the steel industry. Around 58% of the papers used hydrogen peroxide in their processes, while 42% chose not to use it. Finally, approximately 63% of the papers in the portfolio used synthetic effluent in their processes, while the rest (37% of the research) chose to use real effluent. The results obtained in this research by applying the method can contribute to studies related to heterogeneous photocatalysis by alternative means over the years.     

Decontamination of produced water containing petroleum hydrocarbons by electrochemical methods: a minireview

Produced water (PW) is the largest waste stream generated in oil and gas industries. The drilling and extraction operations that are aimed to maximize the production of oil may be counterbalanced by the huge production of contaminated water (called PW) with pollutants, such as heavy metals, dissolved/suspended solids, and organic compounds. PW is conventionally treated through different physical, chemical, and biological methods. In offshore platforms, because of space constraints, compact physical and chemical systems are used. However, major research efforts are being developed with innovative technologies for treating PW in order to comply with reuse and discharge limits. Among them, electrochemical technologies have been proposed as a promising alternative for the treatment of this kind of wastewaters. Then, this paper presents a minireview of efficient electrochemical technologies used until now for treating PW generated by petrochemical industry.     

Evaluation of Extracted Chitosan from Portunus Pelagicus for the Preparation of Chitosan Alginate Blend Scaffolds

In recent years there is a growing need in generating a biocompatible and cost effective porous scaffold for tissue engineering purposes. Therefore, this study focused on conversion of the shell waste of locally available crab variety P.pelagicus (Blue swimming crab) into the chitosan scaffold. As the poor mechanical strength of chitosan limits its usage in tissue engineering, it was blended with alginate. The scaffolds were prepared by the freeze gelation method which requires less time and minimum energy, with fewer residual solvent and easier to scale up. To the best of our knowledge there are no reports on scaffold preparation from the extracted chitosan, blended with alginate by freeze gelation method. The biological properties of chitosan-alginate scaffolds (Cts–Alg) were evaluated and compared with those of chitosan scaffolds. The prepared scaffolds were characterized by SEM, swelling property, in vitro enzymatic degradation, and hemo, biocompatibility properties. Chitosan-alginate scaffolds had an average pore size of 40 μm and tensile strength of 0.564 ± 0.0.018 % MPa. Its swelling ratio was 27.5 ± 0.28 %, with mass loss percentage of 10 ± 0.33 % after 4 weeks of degradation. It has exhibited good hemocompatible properties too. Mouse fibroblast 3T3 cells were able to adhere and proliferate well in the blended scaffold. All these results indicated that chitosan-alginate scaffold is a suitable alternative substitute for tissue engineering.     

Effect of glyphosate on the microbial activity of two Brazilian soils

Glyphosate [N-(phosphonomethyl)-glycine] is a broad-spectrum, non-selective, post-emergence herbicide that is widely used in agricultural. We studied, in vitro, changes in the microbial activity of typical Hapludult and Hapludox Brazilian soils, with and without applied glyphosate. Glyphosate was applied at a rate of 2.16 mg glyphosate kg(-1) of soil and microbial activity was measured by soil respiration (evolution of CO(2)) and fluorescein diacetate (FDA) hydrolysis over a period of 32 days. We found an increase of 10-15% in the CO(2) evolved and a 9-19% increase in FDA hydrolyses in the presence of glyphosate compared with the same type of soil which had never received glyphosate. Soil which had been exposed to glyphosate for several years had the strongest response in microbial activity. Most probable number (MPN) counts showed that after 32 days incubation the number of actinomycetes and fungi had increased while the number of bacteria showed a slight reduction. After the incubation period, high pressure liquid chromatography (HPLC) detected the glyphosate metabolite aminomethyl phosphonic acid (AMPA), indicating glyphosate degradation by soil microorganisms.     

Rheological and Mechanical Properties of Poly(lactic acid)/Bio-Based Polyethylene/Clay Biocomposites Containing Montmorillonite and Vermiculite Clays

Journal of Polymers and the Environment - This work aims to investigate the effect of organically modified montmorillonite (OMMT) and vermiculite (OVT) clays on the properties of poly(lactic acid)...     

Tributyltin chloride disrupts aortic vascular reactivity and increases reactive oxygen species production in female rats

Environmental Science and Pollution Research - Organotin compounds, such as tributyltin (TBT), are environment contaminants that induce bioaccumulation and have potential toxic effects on marine...     

Rural fences in agricultural landscapes and their conservation role in an area of caatinga (dryland vegetation) in Northeast Brazil

Fences are very common in rural areas, and represent important landscape elements in both tropical and temperate climate regions. In spite of their marked presence and importance, fences have been little studied, principally in Brazil. The present study examined the types of fences, the diversity of species used in their construction, as well as the diversity of their uses in a rural community in the municipality of Caruaru, Pernambuco State, northeastern Brazil. Fifty meters of fence-line in each of 50 rural properties in the community were examined, noting the diameter, height and identity of all vegetation elements used in their composition. Semi-structured interviews were also held with their builders in order to obtain information concerning fence uses. In the total of 2,500 linear meters of fence-line, 4,953 individual plant elements were identified, belonging to 51 different species. A majority of the fence elements were non-living fence posts, although the number of living posts was high. Of the total number of fence elements, 66.7% were native to the caatinga region. The large number of native species used as non-living fence posts indicates an intensive use of the caatinga vegetation and suggests the need to stimulate the use of living fence posts for conservation purposes.     

Metal mixtures in pregnant women and umbilical cord blood at urban populations—Rio de Janeiro,Brazil

Environmental Science and Pollution Research - This study aims to assess interrelationships between serum lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) concentrations in pregnant women in...